Used EU Jaw Crusher C80

• Type: Jaw Crusher
• Motor Type: AC Motor
• Motor Power: 75kw
• Application: Stone Industry
• Materials: Stone Industry
• Outlet Size: 0-200
• Model NO.: C80
• Inlet Size: 800X510
• Condition: New
• Warranty: 12 Months
• Trademark: KINGLINK
• Origin: China
• HS Code: 84742090
• Production Capacity: 300

Product Description

C Jaw Crusher

Product Description

PRODUCTS PROFILE

 

FEATURES AND BENEFITS

C series Jaw Crusher has adopted the most advanced crushing technology and research achievement; it is the new crushers with the advanced level, which are successfully developed by using finite element analysis method based on years' experience on jaw crusher design and manufacture.
Compare with traditional jaw crusher, it adopts high-strength material, first-class manufacturing process, and the C series Jaw Crushers provide the advantages of excellent-strength structure, reliable equipment, higher crushing ratio, bigger capacity and lower cost.

 STRUCTURE

1.Two kinds of Frames: Welding and Assembled. Usually, Small and medium sized model adopts welding, large model adopts assembled.
2.Welding frame adopts wide transitional round edge, significantly reducing the stress concentration, ensure the frame under-equal strength. It owns the features of good impact resistance and lowailure rate, bears same pressure, etc
3.Assembled frame uses advanced modulation, no-welding frame structure design, high endurance strength and reliability. The whole set assembling design is convenient for the transporting and installation especially suitable for installation of underground mine shaft, high altitude mine, as well as other narrow and difficult transporting place.

OPTIMIZED CAVITY DESIGN LARGE MATERIAL FEEDING SIZE

Use the symmetrical "V shape cavity design, large angle of toggle plate, large stroke, comparing with the traditional PE series jaw crusher, the C series has larger feeding particle size, higher capacity more uniform particle size, jaw plate loss reduction

LONG WORKING LIFE OF THE HEAVY-DUTY MOVABLE JAWASSEMBLY

Heavy-duty Movable Jaw Assembly adopts heavy-duty eccentric shaft,high quality heavy-load rolling bearings and finite element software optimized movable jaw plate ensuring impact resistance and high stability of moving jaw assembly; labyrinth seal and centralized lubrication system guarantee the bearing lubrication oil is not contaminated and lubrication becomes more convenient. Therefore the assembly can have a long working time and stability.

SHIELD DESIGN FOR THE MOVABLE JAW

Heavy shield is installed above the movable jaw to avoid the material impact. It can effectively protect the movable jaw and its internal bearing from damaging

OVERALL BEARING SUPPORT HOUSING

Overall cast steel bearing housing fully compatible with the frame, avoiding the combined bearing housing has a unnecessary radical load on the bearing during the fastening process, making the bearing to run more smoothly

CONVENIENT DISCHARGE SETTING ADJUSTMENT

C series Jaw Crusher adopts mechanical or hydraulic adjustment for the discharge range, compared with shim adjustment, double wedge adjustment operations is simpler, secure, fast, and saves more downtime

INTEGRATED MOTOR INSTALLATION

Integrated installation of motor seat and frame can not only save installation space, but also can prolong the service life of v-belt, due to the synchronous movement of frame, motor seat, and motor, adjustable motor seat can adjust v-belt tension

VIBRATION ABSORPTION DESIGN

Crusher fixed by rubber vibration absorption device, which can effectively absorb vibration peak, while allow the crusher to move vertically and longitudinally, thus reducing the impact on the foundation
 

PRODUCT SIZE MAP

 

PRODUCT SIZE TABLE 

	C80	C100	C105	C110	C125	C140	C145	C160
A mm	1700	2400	2050	2670	2900	3060	3330	3550
B mm	1200	1700	1450	2000	2100	2260	2430	2650
C mm	2020	2880	2630	2830	3370	3645	3855	4200
D mm	1200	1725	1530	1810	2090	2360	2475	2540
E mm	1565	2250	1920	2385	2690	2890	2870	3180
F mm	160	245	200	380	450	450	450	450
G mm	610	818	780	950	1073	1172	1140	1315
H mm	1000	1400	1200	1500	1600	1600	1800	1800
J mm	930	1170	1200	1300	1470	1640	1640	1880
K mm	117	267	180	250	280	300	250	385

 

TECHNICAL PARAMETERS

 

		C80	C100	C105	C110	C125	C140	C145	C160
Width of feed port		800	1000	1050	1100	1250	1400	1400	1600
Depth of feed port		510	760	700	850	950	1070	1100	1200
Motor power		75	110	110	160	160	200	200	250
speed		350	260	300	230	220	220	220	220
Product size	Tight side outlet	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour	Ton/Hour
0-30	20
0-35	25
0-45	30
0-60	40	65-85
0-75	50	80-95
0-90	60	95-125
0-105	70	115-150	150-210	155-200	190-250
0-120	80	130-170	170-225	175-230	210-275
0-135	90	150-195	190-245	200-260	235-305
0-150	100	165-215	215-280	220-290	255-330	290-380
0-185	125	210-275	265-345	280-365	310-405	350-455	385-500	400-520
0-225	150	250-325	315-410	335-435	370-480	410-535	455-590	470-610	520-675
0-260	175	290-380	370-480	390-510	425-550	470-610	520-675	540-700	595-775
0-300	200		420-545	445-580	480-625	530-690	590-765	610-795	675-880
0-340	225					590-770	655-850	680-885	750-975
0-375	250					650-845	725-945	750-975	825-1070
0-410	275							820-1070	900-1170
0-450	300								980-1275

 
Note : the data is sampled according to on-site operation conditions .
The closed side setting is used for production according to applications and production requirements For detailed information about the applications of the crusher, please consult Kinglink. The above figures show the output and capacity of the crusher for processing medium and hard materials with bulk density of 1. 6t/m. The materials can readily enter the crushing chamber without bridging, the minimum value will be used with feeding material in case of eliminating fines(smaller than crusher setting), and maximum value will be used for feeding materials including fines. The capacity may vary depending on the feeding method and feed characteristics such as gradation, moisture, clay content bulk density and crushability.
Measurement of the jaw crusher s closed side setting varies depending on the jaw profile that is being used, which will affect the capacity of the crusher and the size of the product. The capacity and performance of the crusher can be improved by following factors:
 
1.Proper selection of the jaw plate
2.Proper feed gradation
3.Controlled feed rate
4.Enough capacity of the feeder and adequate feed width
5.Adequate crusher discharge area
6.Suitable discharging conveyor is well matched with the maximum capacity of the crusher

TECHNICAL DATA

		C80	C100	C105	C110	C125	C140	C145	C160
Feeding port	mm	800*510	1000*760	1050*700	1100*850	1250*950	1400*1070	1400*1100	1600*1200
Motor power	kw	75	110 (90)	110	132 (160)	160 (132)	200 (160)	200	250 (200)
speed	rpm	350	260	300	230	220	220	220	220
Length of fixed jaw plate	mm	1100	1600	1450	1800	2000	2100	2300	2500
Maintenance of maximum weight (Movable jaw assembly without flywheel)	kg	2870	7060	4020	9000	12960	15950	18600	21380
Gross weight (excluding support)	kg	7520	20100	13500	25060	36700	45300	53800	68600