| Customization: | Available |
|---|---|
| Certification: | CE, ISO 9001:2000, ISO 9001:2008 |
| Standard: | GOST |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Spare parts for all series jaw crusher PE and PEX type as below model:
| PE SERIES | |||||||
|---|---|---|---|---|---|---|---|
| Model | Feed Oping (mm) |
Max Feeding (mm) |
Discharge Oping (mm) |
Capacity (t/h) |
REV (r/min) |
Power (kw) |
Weigth (t) |
| PE250×400 | 250×400 | 210 | 20-60 | 5-30 | 300 | 15 | 2.8 |
| PE400×600 | 400×600 | 340 | 40-100 | 16-85 | 275 | 30 | 6.5 |
| PE500×750 | 500×750 | 425 | 50-100 | 45-130 | 275 | 55 | 10.1 |
| PE600×900 | 600×900 | 500 | 60-160 | 50-160 | 250 | 55-75 | 15.5 |
| PE750×1060 | 750×1060 | 630 | 80-140 | 52-180 | 250 | 110 | 28 |
| PE800×1060 | 800×1060 | 650 | 100-200 | 85-185 | 250 | 110 | 30 |
| PE870×1060 | 870×1060 | 670 | 200-260 | 181-210 | 250 | 110 | 30.5 |
| PE900×1200 | 900×1200 | 750 | 195-265 | 140-280 | 200 | 110-132 | 50 |
| PE1000×1200 | 1000×1200 | 850 | 195-265 | 160-390 | 200 | 110-132 | 51 |
| PE1200×1500 | 1200×1500 | 1020 | 150-300 | 300-780 | 180 | 160 | 100.9 |
| PEX250×750 | 250×750 | 210 | 25-60 | 8-30 | 330 | 22 | 4.9 |
| PEX250×1000 | 250×1000 | 210 | 25-60 | 16-68 | 330 | 30-37 | 6.5 |
| PEX250×1200 | 250×1200 | 210 | 25-60 | 20-78 | 330 | 37 | 7.7 |
| PEX300×1300 | 300×1300 | 250 | 20-90 | 20-118 | 330 | 55 | 11 |
* Smaller closed side settings can be often used depending on application and production requirements. For a performance estimation for your specific application, please contact Kinglink.
The above figures represent through the crusher capacities, which are based on a feed material with an average specific gravity of 2.7 t/m3, a maximum feed size that will enter the crusher without bridging and material finer than the crushers closed side setting removed. The capacities may vary depending on the feeding method and on feed characteristics such as gradation, bulk density, moisture, clay content and crushability. Measurement of the crusher's closed side setting varies depending on the jaw profile that is being used and has an impact on the crusher's capacity and product gradation. The following factors will enhance crusher capacity and performance:
1. Proper selection of the jaws.
2. Proper feed gradation.
3. Controlled feed rate.
4. Sufficient feeder capacity and width.
5. Adequate crusher discharge area.
6. Discharge conveyor sized to convey maximum crusher capacity.
){kind=link}