Hydraulic Stone Hammer/Limestone Impact Crusher for Aggregates/Coal/Asphalt/Concrete Crushing (KPF1420)

Product Description

Product Description

Introduction:

Impact crushers are widely applied in metallurgy, building materials, chemical industries. They are ideal for crushing medium hard brittle materials of coarse, secondary and fine crushing stages, such as limestone, dolomite, sandstone, graphite, rock salt, granite and basalt. Our impact crusher have high reduction ratio, unequaled output, uniform production size, compact process, simple construction, easy operation and maintenance.


Working principle:
This hydraulic impact crusher machine crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.


Advantages & Chacteristics:
(1) We use German technology. The unique structure of it has reliable and smooth performance, and lower energy consumption
(2) The perfect combination of the design of heavy rotor, high wear-resistant blow bar, unified integrated liner (main wear areas of liner using the same size so that it can be fully interchangeable) and deep arc-shape crushing chamber increase the production capacity and product quality (sand content exceeds 20%, the shape of product better than traditional types of impact crusher); at the same time improving the utilization of wear parts, reducing production costs.
(3) Front and rear racks can be opened, so maintenance space will be increased, easy for the operation.
(4) High chrome blow bar, the bearing can be selected to be made in china.

Benefits

• Three-Four Rows of Blow Bars;
• Extra large Feed Opening;
• Rotor Assembly equipped with antiskid device;
• 45 degree Feed Chute with replaceable Liners;
• Hydraulic Hood Opening.

Main Technical Data

KPF SERIES
Model	Size of feed opening (mm)	Diameter of Rotor (mm)	Width of Rotor(mm)	Power   (kw)	Weight    (t)	The Capacity(TPH) of different Discharge size(mm)
						76	63	51	38	25	19
KPF1010	930×800	1020	914	55-75	10.3	135	120	110	94	80	60
KPF1012	1160×800	1020	1143	90-110	11.5	170	150	137	120	100	75
KPF1016	1540×800	1020	1524	110-132	13.35	215	186	160	145	116	95
KPF1408	1065×778	1330	762	55-75	11.4	173	152	140	121	102	76
KPF1410	1065×930	1330	914	90-110	13.9	209	184	169	145	124	92
KPF1412	1160×1065	1330	1143	132-160	16	261	230	211	184	155	116
KPF1416	1540×1065	1330	1524	185-220	19.5	422	382	344	303	254	193
KPF1420	1844×1065	1330	1848	185-220	22	548	496	448	394	330	250

 * Capacity based on continuous regulated feed of clean, dry limestone of normal hardness with a bulk density of 1.6 ton/m3. Capacity may vary with the size and nature of the rock and the working conditions of the plant.

Kinglink Machines







Note: All the above information is subject to our final confirmation.